[RMVHF] Re: [Fwd: [4038416.arrl-vhf-jun] N0YE] Log format

[Jim W0EEA]

Wayne Heinen wrote:

> Quoting Jim W0EEA <w0eea at w0eea.com>:
>
>> That is 'correct.'  The ARRL robot now wants to see Cabrillo V3.0 logs.
>>
>> In Cabrillo 3 format the correct bands are 1.2G  2.3G  3.4G  5.7G   
>> 10G and 24G.
>>
>> The G _must_ be there.
>>
>> Also  900-928 MHz QSOs are all on 902.  903 or any other 900 MHz freq
>> will cause that
>> line to be rejected also.
>>
>> The robot also rejects lines ending with a computer ID number saying
>> 'not in Cabrillo format.'
>>
>>
>>
>>
>> 73,  Jim
>> W0EEA
>>
>
> Jim et al
>
> The logger accepted 1.2 without a G from my log.  My software is 
> still  2.0...  I didn't realize I'd needed to change...
>
> Wayne N0POH
>
>

Hi Wayne,

The question is, are you sure it scored the log properly?

Did you actually run low power?  The robot assumes answers if the line 
isn't there.

They may have worked on the robot since they first tried to switch it 
over,  but it
was making mistakes and filling in blanks with assumptions,  too.

Jim